Hitachi XP P9500 User Manual page 348

3. Creating an HDLM Environment
Figure 3-44: Example of Executing the mount Command When the Boot
Loader Is LILO or GRUB
• When the boot loader is ELILO running on an IPF host
Figure 3-45: Example of Executing the mount Command When the Boot
Loader Is ELILO shows an example of executing the
Figure 3-45: Example of Executing the mount Command When the Boot
Loader Is ELILO
Refer to the
is displayed in the
Go to step 18.
16. Update the information about the volume group.
Execute the following command to update the information about the volume
group.
# vgscan
Reading all physical volumes.
Found volume group "VolGroup00" using metadata type lvm2
17. Check the relationship between the volume group and HDLM devices.
Execute the following command to make sure that the physical volumes that make
up the volume group are not HDLM devices.
324
file to make sure that the specified SCSI device name
/proc/swaps
column.
Filename
command.
mount
This may take a while...