Hitachi XP P9500 User Manual page 338

3. Creating an HDLM Environment
2. Make sure that the HDLM device is defined in the
Make sure that the mount points for the following HDLM management-target
devices are defined so that the HDLM device will be mounted:
• When
Root directory (
• When
Root directory (
• When
Root directory (
• When LVM2 is used:
/boot
The following shows an example of the
/dev/sddlmaa2
3. Execute the HDLM-configuration definition utility (
parameter specified to check the correspondence between the HDLM device and
the SCSI device.
If the SCSI device name has been changed by using the
the
-udev
Figure 3-41: Example of Executing the dlmcfgmgr Utility with the -v Parameter
Specified shows an example of executing the
parameter specified. Figure 3-42: Example of Executing the dlmcfgmgr Utility
with the -v and -udev Parameters Specified shows an example of executing the
dlmcfgmgr
314
is used as the boot loader:
ELILO
),
/ /boot/efi
is used as the boot loader:
GRUB
), ,
/ /boot /tmp
is used as the boot loader:
LILO
), ,
/ /tmp /usr
/ ext2
parameter also.
utility with the and
-v
/etc/fstab
, , , ,
/tmp /usr /var swap
, , ,
/usr /var swap
, ,
/var swap
file:
/etc/fstab
:
:
defaults
:
:
dlmcfgmgr
udev
utility with the
dlmcfgmgr
parameters specified.
-udev
file.
1 1
) with the
-v
function, specify
-v