Hitachi XP P9500 User Manual page 273

When you use the
system recognize the partitions on the HDLM device, execute the
command after the
3. Edit the
/etc/lvm/lvm.conf
Edit the device section in the file as shown below to disable the SCSI device
configuration and enable the HDLM device configuration:
• Adding and deleting
Add the following line and comment out all other
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]
command to change the partition, to let the
parted
command.
parted
file.
entry information
filter
3. Creating an HDLM Environment
blockdev
entry information:
filter
249