logical volume. Use the following procedure to configure the environment shown in
Figure 3-28: Device configuration When Creating a Logical Volume on an HDLM
Device.
Figure 3-28: Device configuration When Creating a Logical Volume on an
HDLM Device
To create a new logical volume on an HDLM device:
1.
Stop all processes and services that are using the HDLM device.
2.
Create a disk partition on the HDLM device and change the system ID from
(
in hexadecimal representation) to
Linux
83
representation).
The following shows an example of how to create two partitions in
(HDLM device):
sddlmad
Example of executing the
Linux LVM
command (IA32):
fdisk
3. Creating an HDLM Environment
(
in hexadecimal
8e
/dev/
247