Hitachi XP P9500 User Manual page 228

3. Creating an HDLM Environment
KAPL12329-I The utility for supporting the boot disk
started.
KAPL12344-I A compressed initial ramdisk image /boot/
initrd-hdlm-2.6.9-11.EL.gz was created.
KAPL12330-I The utility for supporting the boot disk
completed.
Example of Executing the
boot loader) is used
# /opt/DynamicLinkManager/bin/dlmmkinitrd /boot/efi/efi/
redhat/initrd-hdlm-2.6.9-11.EL.gz `uname -r`
KAPL12329-I The utility for supporting the boot disk
started.
KAPL12344-I A compressed initial ramdisk image /boot/efi/
efi/redhat/initrd-hdlm-2.6.9-11.EL.gz was created.
KAPL12330-I The utility for supporting the boot disk
completed.
The following examples show how to execute the
are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise Server
11:
# /opt/DynamicLinkManager/bin/dlmmkinitrd
KAPL12329-I The utility for supporting the boot disk started.
KAPL12344-I A compressed initial ramdisk image /boot/
initrd-2.6.16.46-0.14-default.hdlm was created.
KAPL12330-I The utility for supporting the boot disk
completed.
14. Back up the
15. Edit the
/etc/fstab
Change the
to the HDLM device. Comment out the existing SCSI device specification by
placing a hash mark (
device specification as shown below, based on the correspondence between the
HDLM device and the SCSI device as checked in step 11.
#LABEL=/boot
#/dev/sda1
204
dlmmkinitrd
file.
/etc/fstab
file.
mount point that you changed in step 8 from the SCSI device
/boot
) at the beginning of each line, and then add the HDLM
#
/boot
/boot
utility when IPF (with ELILO as the
dlmmkinitrd
:
:
ext3 defaults
ext3 defaults
utility when you
1 2
1 2