Hitachi XP P9500 User Manual page 216

3. Creating an HDLM Environment
After:
title sd-Red Hat Enterprise Linux (2.6.18-194.el5)
• When LILO or ELILO is used as the boot loader:
Change the underlined text as follows:
Before:
label=HDLM_194.EL
After:
label=sd-HDLM_194.EL
7. Specify the SCSI device you checked in step 3 for
configuration file.
Change the specification for
in step 5.
• When GRUB is used as the boot loader:
Add
title Red Hat Enterprise Linux (2.6.18-194.el5)
ramdisk_size=18958 root=/dev/sda2
• When LILO or ELILO is used as the boot loader:
Add
8. Specify the initial RAM disk image file for the SCSI device, for
contained in the boot loader configuration file.
Change the
If you are using a Xen kernel, change the
to the initial RAM disk image file for the SCSI device. For details on Xen kernels,
see Table 3-47: Xen Hypervisor Operating Environments Supported by HDLM.
If any options have been specified to suit the user environment, take care not to
delete those options.
Create the initial RAM disk image file for the SCSI device according to the
mkinitrd
9. In the boot loader configuration file, edit the settings to be used during a boot.
192
root
SCSI-device to the
root=
:
:
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro
SCSI-device as the last line of the configuration.
root=
specification in the configuration that you copied in step 5.
initrd
command documentation for the OS.
in the boot loader
root
contained in the configuration that you copied
line.
kernel
option
option
file name specified in
initrd
initrd
module