Name
: HDLM
Version
:
Release
:
:
If
HDLM Version
x.x.x.x.xxx indicates the HDLM version that was installed.
8.
If you want to set the HDLM driver options, run the
For details on this utility, see 7.6 dlmsetopt Utility for Setting HDLM Driver
Options.
9.
Add
/opt/DynamicLinkManager/bin
the environment setup file for the shell used by the root user.
Add the following code to the
settings file for the root user. This makes executing the HDLM commands and
HDLM utilities easier.
When the BourneAgain shell or Korn shell is used:
PATH=$PATH:/opt/DynamicLinkManager/bin ; export PATH
When the C shell is used:
set path= ( $path /opt/DynamicLinkManager/bin )
If the
environment variable is not set, specify an absolute path to execute
PATH
commands and utilities.
10. If you have edited the
for Devices to Be Managed by HDLM in 3.6.1 Preparations for a New
Installation of HDLM, add the line show below to change the setting from a SCSI
device specification to an HDLM device specification.
The Linux functionality that adds
HDLM. Do not use this functionality.
An example of how to edit the
x.x.x.x.xxx
xx
is x.x.x.x.xxx, the installed version of HDLM is correct.
environment variable in the environment
PATH
file as described in (1) Operations Required
/etc/fstab
LABEL=
/etc/fstab
3. Creating an HDLM Environment
dlmsetopt
in the environment variable
to a SCSI device is not supported in
file is shown in the following figure:
utility.
in
PATH
169