Hitachi XP P9500 User Manual page 187

settings file for the root user. This makes executing the HDLM commands and
HDLM utilities easier.
When the BourneAgain shell or Korn shell is used:
PATH=$PATH:/opt/DynamicLinkManager/bin ; export PATH
When the C shell is used:
set path= ( $path /opt/DynamicLinkManager/bin )
If the environment variable is not set, specify an absolute path to execute
PATH
commands and utilities.
If you have performed steps 11, go to step 14.
13. Restart the host.
Execute the following command to restart the host:
# shutdown -r now
A path will be established in the HDLM device and the HDLM manager will start.
14. If you have edited the
for Devices to Be Managed by HDLM in 3.6.1 Preparations for a New
Installation of HDLM, add the line show below to change the setting from a SCSI
device specification to an HDLM device specification.
The Linux functionality that adds
HDLM. Do not use this functionality.
An example of how to edit the
Add the shaded line shown in the above figure.
15. Specify the settings required for using LUKS.
Perform this step if your host OS uses LUKS. If HDLM manages a SCSI device
that has been configured to use LUKS, the LUKS settings must be migrated from
the SCSI device to an HDLM device.
file as described in (1) Operations Required
/etc/fstab
to a SCSI device is not supported in
LABEL=
file is shown in the following figure:
/etc/fstab
3. Creating an HDLM Environment
163