Hitachi XP P9500 User Manual page 149

Directory
/var
/opt
/etc
/root
/sbin
#1
This size differs depending on the settings for log files (maximum size: 30 GB).
p is obtained by the following formula:
p = (s x m) / 1024 [MB]
Where s is the error log file size (unit: KB, default value: 9900) and m is the
number of error log files (default value: 2). The result is rounded up to MB.
#2
This size differs depending on the settings for trace files (maximum size: 1000
MB).
q is obtained by using the following formula:
q = (t x n) / 1024 [MB]
Where t is the trace file size (unit: KB, default value: 9900) and n is the number
of trace files (default value: 4). The result is rounded up to MB.
#3
The size of the process-specific-trace information file.
#4
The size of the log file for inquiry information.
u is obtained by using the following formula:
u = (2500 bytes x number-of-paths) / 1024 / 1024 [MB]
The result is rounded up to MB.
#5
The default value for the size of the log files for Hitachi Command Suite Common
Disk capacity requirements
#1 #2 #3
p MB + q MB + 4 MB
#7
(100 MB )
168 MB
#8 #9
y MB + z MB + 5.5 MB
#7
(10 MB )
580 KB
500 KB
3. Creating an HDLM Environment
#4 #5
+ u MB + 20 MB + v MB
#6
+ 45 MB
125