Remove Any Installed Line Modules - HP Aruba 6400 Series Installation And Getting Started Manual

Remove any installed line modules

Procedure
CAUTION: Handle your Aruba 6400 switch line modules with care. Rough or careless handling
can damage the modules and result in unplanned down time.
1. Remove any installed line modules from slots 3 through 7 on the Aruba 6405 switch or slots 3 through 12
on the Aruba 6410 switch.
1
2. Place removed line modules in anti-static bags.
3. Install line module slot covers on all empty line module slots.
Chapter 5 Unpacking, lifting, and moving the chassis
2
3
2
1
45