Defining An Environment Variable; Verifying Eem Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 54 Configuring the Embedded Event Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 5
event event-statement
Step 6
action action-statement
Step 7
show event manager policy-state name
Step 8
copy running-config startup-config

Defining an Environment Variable

To define a variable to serve as a parameter in an EEM policy, follow these steps:
Command
Step 1
config t
Step 2
event manager environment variable-name
variable-value
Step 3
show event manager environment
Step 4
copy running-config startup-config

Verifying EEM Configuration

To display EEM configuration information, perform one of the following tasks:
Command
show event manager environment
[variable-name | all]
show event manager event-types [event | all
| module slot]
show event manager history events [detail]
[maximum num-events] [severity
{catastrophic | minor | moderate | severe}]
show event manager policy internal
[policy-name] [inactive]
show event manager policy-state policy-name
show event manager script system
[policy-name | all]
OL-18084-01, Cisco MDS NX-OS Release 4.x
Purpose
Configures the event statement for the policy. See the
"Configuring Event Statements" section on page
Configures an action statement for the policy. See the
"Configuring Action Statements" section on
page 54-8.
Repeat Step 6 for multiple action statements.
(Optional) Displays information about the configured
policy.
(Optional) Saves this configuration change.
Purpose
Enters configuration mode.
Create an environment variable for EEM. The
variable-name can be any case-sensitive alphanumeric
string up to 29 characters. The variable-value can be
any quoted alphanumeric string up to 39 characters.
(Optional) Displays information about the configured
environment variables.
(Optional) Saves this configuration change.
Purpose
Displays information about the event manager
environment variables.
Displays information about the event manager
event types.
Displays the history of events for all policies.
Displays information about the configured
policies.
Displays information about policy state, including
thresholds.
Displays information about the script policies.
Cisco MDS 9000 Family CLI Configuration Guide
Verifying EEM Configuration
54-6.
54-11