Showing System Resources; Table 1-7 Field Descriptions For The Show System-Resources Command - Cisco 11503 - CSS Content Services Switch Administration Manual

Chapter 1 Managing the CSS Software

Showing System Resources

Note
OL-5647-02
Use the show system-resources command to display information about the size
of the installed memory and free memory available on the:
CSS 11501.
•
• CSS 11503 or CSS 11506 SM and SCM module. The CSS displays system
resources for the primary SCM. To view a specific slot in the CSS, use the
show system-resources slot_number command. Enter a number to specify
the slot number (slot_number) in the CSS.
Issuing the show system-resources command can cause CSS CPU usage to
increase. If the CSS 11503 or 11506 has multiple modules installed, using this
command increases CPU usage accordingly. The increased CPU usage is a direct
result of the computational overhead that occurs when the CSS polls the modules
and calculates CPU usage.
Table 1-7 describes the fields in the show system-resources command output.
Table 1-7 Field Descriptions for the show system-resources Command
Field
Installed Memory
Free Memory
CPU
Buffer Statistics
Buffer Pool
Size
Total
Available
Failures
Low Buffer Count
Description
The total memory size in the CSS
The amount of free memory available
The utilized percentage of the CPU
The buffer pool index
The size, in bytes, of each data buffer in the buffer pool
The total number of buffers in the buffer pool
The current number of available buffers in the buffer
pool
The number of failures to obtain a buffer from the
buffer pool
The lowest recorded number of available buffers
Cisco Content Services Switch Administration Guide
Showing CSS Configurations
1-43