Configuring Mac Authentication Bypass - Cisco Catalyst 2960-X Security Configuration Manual

Configuring IEEE 802.1x Port-Based Authentication
Command or Action
Step 5
show authentication sessions interface interface-id
Example:
Switch# show authentication sessions interface
gigabitethernet2/0/3
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring MAC Authentication Bypass

Beginning in privileged EXEC mode, follow these steps to enable MAC authentication bypass. This procedure
is optional.
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. authentication port-control auto
4. mab [eap]
5. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 interface interface-id
Example:
Switch(config)# interface gigabitethernet2/0/1
OL-29048-01
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enters the global configuration mode.
Specifies the port to be configured, and enter interface
configuration mode.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Configuring MAC Authentication Bypass
333