Wac User Settings; Wac Port Settings - D-Link xstack DES-3810 series Reference Manual

®
xStack

WAC User Settings

Users can view and set local database user accounts for Web authentication.
To view the following window, click Security > Web-based Access Control (WAC) > WAC User Settings, as shown
below:
The fields that can be configured are described below:
Parameter
User Name
VLAN Name
VID (1-4094)
Password
Confirm Password
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries listed.
Click the Edit VLAN Name button to re-configure the specific entry's VLAN Name.
Click the Edit VID button to re-configure the specific entry's VLAN ID.
Click the Clear VLAN button to remove the VLAN information from the specific entry.
Click the Delete button to remove the specific entry.
NOTE: WAC Usernames and Passwords should be less than 16 characters.

WAC Port Settings

Users can view and set port configurations for Web authentication.
To view the following window, click Security > Web-based Access Control (WAC) > WAC Port Settings, as shown
below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 9-44 WAC User Settings window
Description
Enter the user name of up to 15 alphanumeric characters of the guest wishing to access
the Web through this process. This field is for administrators who have selected Local as
their Web-based authenticator.
Click the button and enter a VLAN Name in this field.
Click the button and enter a VID in this field.
Enter the password the administrator has chosen for the selected user. This field is case-
sensitive and must be a complete alphanumeric string. This field is for administrators who
have selected Local as their Web-based authenticator.
Retype the password entered in the previous field.
317