Security > Web-Based Access Control (Wac) > Wac Port Settings; Security > Web-Based Access Control (Wac) > Wac Authentication State - D-Link DGS-1210/ME User Manual

4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.147 – Security > Web-based Access Control (WAC) > WAC User Settings
User Name: Enter the user name of up to 15 alphanumeric characters of the guest wishing to access the
Web through this process. This field is for administrators who have selected Local as their Web-based
authenticator.
VID: Enter the VID.
Password: Enter the password the administrator has chosen for the selected user. This field is case-
sensitive and must be a complete alphanumeric string. This field is for administrators who have selected
Local as their Web-based authenticator.
Confirm Password: Retype the password entered in the previous field.
Click Add button to create a new WAC user.
Security > Web-based Access Control (WAC) > WAC Port Settings
The WAC Port Settings page allows user to set port configurations for Web authentication.
Figure 4.148 – Security > Web-based Access Control (WAC) > WAC Port Settings
The user may view the following parameters:
From Port / To Port: Select the port ranges to be enabled as WAC ports.
Aging Time (1-1440): This parameter specifies the time period during which an authenticated host will
remain in the authenticated state. Enter a value between 0 and 1440 minutes. A value of 0 indicates the
authenticated host will never age out on the port. The default value is 1440 minutes (24 hours). Tick the
adjacent Infinite textbox to disable aging. The default value is infinite.
State: To enable the configured ports as WAC ports.
Block Time (0-300): This parameter is the period of time a host will be blocked if it fails to pass
authentication. Enter a value between 0 and 300 seconds. The default value is 30 seconds.
Click Apply to implement changes made.
Security > Web-based Access Control (WAC) > WAC Authentication State
The WAC Authentication State page allows user to display the current WAC Authentication State and delete
WAC authentication state settings.
86