Table of Contents
Advertisement
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
show isis topology
undebug isis
Displaying CLNS
You can display the following information related to the CLNS protocol:
400
Monitoring IS-IS
host1#show isis summary-addresses
Prefix
Level
------------
-------------
2008::0/8
LEVEL-2
See show isis summary-addresses
Use to display the paths to all intermediate systems or specific types of
intermediate systems.
Field descriptions
System ID Name or system ID of the intermediate system
Metric Metric of the path to the intermediate system
Next Hop Destination IP address of the intermediate system
Interface Interface from which neighbor was learned
SNPA Subnetwork point of attachment; for a LAN circuit, it is the MAC
address; not meaningful for a point-to-point circuit.
Example
host1#show isis topology level-1
IS-IS paths for level-1 routers
-------------------------------
System-ID
Metric
------------- ------
barcelona:vr2
10
See show isis topology
Use to cancel the display of information about a selected event.
The same IS-IS variables can be designated as in the debug isis command.
Example
host1#undebug isis adj-packets
There is no no version.
See undebug isis
CLNS information about interfaces
Information about router adjacencies
Metric
Tag
----------
------
0
100
Next Hop
Intf
-------------
--------
barcelona:vr2
at2/0.12
State
-------
ENABLED
SNPA
----
Advertisement
Table of Contents
