Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 330

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
show ip ospf database
show ipv6 ospf database
306
Monitoring OSPF
host1#show ipv6 ospf border-routers
OSPF Area Border Routers
Destination
10.0.0.10
10.0.0.11
10.0.0.11 FE80::5
OSPF Autonomous System Border Routers
Destination
10.1.1.4
10.1.1.5
See show ip ospf border-routers
See show ipv6 ospf border-routers
Use to display the full IP OSPF database, a summary of the database, or LSAs
specific to the given area.
Field descriptions
Link ID Link-state ID of the LSA; for OSPFv2:
For router links, set to the router's OSPF router ID
For network links, set to the IP interface address of the network's
designated router
For type 3 summary LSAs, set to an IP network number
For type 4 summary LSAs, set to an AS boundary router ID
For type 5 externals, set to an IP network number
Link ID Link-state ID of the LSA; for OSPFv3:
For link LSAs, set to the interface ID
For network links, set to the interface ID
For router links, set to integer
For intra-area prefix links, set to integer
For interarea prefix links, set to integer
For interarea router links, set to integer
For external links, set to integer
For grace links, set to integer
ADV Router ID of the advertising router
Age Link-state age
NEXT_HOP Interface
FE80::3 ATM4/1.39
FE80::4 ATM4/0.41
ATM4/1.48 INTRA
NEXT_HOP Interface
FE80::3 ATM4/1.39
FE80::4 ATM4/0.41
RouteType Area
INTRA 0.0.0.0
INTRA 0.0.0.0
100.0.0.1
RouteType Area
INTER 0.0.0.0
INTER 0.0.0.0