Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 415

Area Address Area addresses that can be reached from the router
NLPID ISO network layer protocol identifier
IP Address IP address of the interface
Hostname Hostname of the router
Router ID ID configured on the router
Metric Metric that indicates either of the following costs:
Cost of adjacency between the originating router and the advertised
neighbor
Cost between the advertising router and the advertised destination
IPv4 Interface Address Address of the interface
IPv4 Neighbor Address Address of a neighbor
Maximum link bandwidth Bandwidth capacity of the link in bits per second
Reservable link bandwidth Amount of bandwidth reservable on the link
(whether reserved or not)
Unreserved bandwidth Amount of bandwidth available for reservation on
the link
TE default metric Traffic engineering default metric value
Tag value(s) Route tag assigned to the IS-IS interface, if configured
Example 1
host1#show isis database
IS-IS Level-1 Link State Database
LSPID LSP Seq Num
0000.0000.004E.00-00
0000.0000.3333.00-00* 0x0000020F
0000.0000.3333.02-00
0000.0000.7500.00-00
0090.1A00.B000.00-00
0090.1A00.C000.00-00
IS-IS Level-2 Link State Database
LSPID LSP Seq Num
0000.0000.004E.00-00
0000.0000.3333.00-00* 0x00000257
0000.0000.3333.02-00
0000.0000.7500.00-00
0010.7B36.5FF7.00-00
0090.1A00.B000.00-00
0090.1A00.C000.00-00
Example 2
host1#show isis database detail
LSPID LSP Seq Num
boston.00-00*0x000001160x4760 6551/0/0
LSP Checksum LSP Holdtime ATT/P/OL
0x000013F5 0x8BAA 1198
0xEA1E 1199
0x00000007 0x8C30 1199
0x0000308D 0x5EDF 1198
0x00000011 0xB082 1195
0x0000005F 0x9860 1196
LSP Checksum LSP Holdtime ATT/P/OL
0x00001355 0x0DA7 1198
0x566B 1199
0x00000007 0x8C30 1199
0x00003315 0x3627 1198
0x00000BAF 0x187A 1183
0x00000016 0xD624 1195
0x00000071 0x9358 1196
LSP Checksum LSP Holdtime ATT/P/OL
Chapter 6: Configuring IS-IS
0/0/0
0/0/0
0/0/0
0/0/0
1/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
1/0/0
0/0/0
391
Monitoring IS-IS