Table of Contents
Advertisement
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
show Commands
The show commands provide information about the following OSPFv2 and OSPFv3
items:
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string you specify. See JUNOSe System Basics
Configuration Guide, for details.
show ip ospf
show ipv6 ospf
302
Monitoring OSPF
Use to cancel the display of information about a selected event.
The same OSPF variables can be designated as in the debug ip ospf or debug
ipv6 ospf commands.
Example 1
host1#undebug ip ospf adj
Example 2
host1#undebug ipv6 ospf lsa
There is no no version.
See undebug ip ospf
See undebug ipv6 ospf
Routing processes
Border routers
Database
Interfaces
Neighbors
Traffic
Virtual links
Internal statistics
MPLS tunnels and opaque LSAs
Use to display general information about OSPF routing processes.
Field descriptions
Routing Process Process ID, router ID, domain ID
OSPF administrative state Enabled or disabled
OSPF operational state Enabled or disabled
Incremental External SPF On or off
Advertisement
Table of Contents
Need help?
Do you have a question about the IGP - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?