Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 205

Software for e series broadband services routers ip, ipv6, and igp configuration guide
Table of Contents

Advertisement

show ipv6 traffic
6::/64
2003::/16
See show ipv6 static
Use to display statistics about IPv6 traffic.
Field descriptions
IPv6 statistics Rcvd:
total Total number of packets received
local destination Number of packets received with this router as their
destination
hdr errors Number of packets containing header errors
addr errors Number of packets containing addressing errors
unkn proto Number of packets received containing unknown protocols
discards Number of discarded packets
IPv6 statistics Sent:
forwarded Number of packets forwarded
generated Number of packets generated
out disc Number of packets that could not be routed that were discarded
IPv6 statistics Mcast:
received Number of multicast packets received
forwarded Number of multicast packets forwarded
IPv6 statistics (Routes) Number of routes currently in the routing table
ICMPv6 statistics Rcvd:
total Total number of received packets
errors Error packets received
destination unreach Packets received with destination unreachable
admin unreach Packets received because the destination was
administratively unreachable (for example, the packet encountered a
firewall filter)
parameter problem Packets received with parameter errors
time exceeded Packets received with time-to-live exceeded
pkt too big Number of packet-too-big messages received that indicate
a packet was too large to forward because of the allowed MTU size
5::2
1/0
5::1
1/0
Chapter 2: Configuring IPv6
ATM4/0.15
ATM4/0.15
181
Monitoring IPv6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IGP - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?

Table of Contents