Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 143

show ip traffic
Buffers Outstanding: 25
High Water: 28
Buffers discarded: 15
...
TCP-Paws is disabled
See show tcp statistics
Use to display statistics about IP traffic.
You can use the ipTraffic log to show consumable IP traffic to the SRP module;
the traffic is filterable per router and IP interface. You can show ICMP, TCP, and
UDP traffic with the icmpTraffic, udpTraffic, and tcpTraffic logs.
Field descriptions
IP Statistics Rcvd:
router Id Router ID number
total Number of frames received
local destination Frames with this router as their destination
hdr errors Number of packets containing header errors
addr errors Number of packets containing addressing errors
unkn proto Number of packets received containing unknown protocols
discards Number of discarded packets
IP Statistics Frags:
reassembled Number of reassembled packets
reasm timed out Number of reassembled packets that timed out
reasm req Number of requests for reassembly
reasm fails Number of reassembly failures
frag ok Number of fragmented packets reassembled successfully
frag fail Number of fragmented packets reassembled unsuccessfully
frag creates Number of packets created by fragmentation
IP Statistics Sent:
forwarded Number of packets forwarded
generated Number of packets generated
out disc Number of outbound packets discarded
Chapter 1: Configuring IP
119
Monitoring IP