Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 108

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
show ip address
84
Monitoring IP
Use to display general information about IP.
Field descriptions
IP Router Id Router ID number
Router Name Router name
Default TTL Default IP TTL (time-to-live) value
Reassemble Timeout Amount of time (in minutes) IP waits for missing
packet fragments before it drops the fragments it is holding
SA Validate Trap Whether the source address validation trap is enabled
Example
host1#show ip
IP Router Id: 192.168.1.155
Router Name: default
Default TTL: 60
Reassemble Timeout: 30
SA Validate Trap: false
See show ip
Use to display detailed or summary information about a particular IP interface.
Specify a VRF name to view information for only that VRF.
Use the brief keyword to display summary information about the interface.
Use the detail keyword to display detailed information about the interface.
Field descriptions
Network Protocols Network protocols configured on this interface
Internet address IP address and subnet mask of this interface
Broadcast address Broadcast address of this interface
Operational MTU MTU of this interface
Administrative MTU Value of the MTU if it has been administratively
overridden using the configuration
Operational speed Speed of the interface
Administrative speed Value of the speed if it has been administratively
overridden using the configuration
Discontinuity Time Value of the SysUpTime when the interface statistics
last started being valid
Router advertisement Status of router discovery advertisement: enabled,
disabled
Proxy Arp Status of the feature: enabled, disabled