Table of Contents
Advertisement
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
176
Monitoring IPv6
Shutdown in overload state Status of shutdown in an overload state
Default local preference Default value for local preference
IGP synchronization Indicates whether synchronization is enabled or
disabled
Default originate Indicates whether network 0.0.0.0 is redistributed into
BGP
Auto summary Status of autosummary
Always compare MED Status of always compare MED
Compare MED within confederation Status of compare MED within a
confederation
Advertise inactive routes Status of Advertise inactive routes
Advertise best external router to internal peers Status of Advertise best
external router to internal peers
Enforce first AS Status of Enforce first AS
Missing MED as worst Status of Missing MED as worst
Route flap dampening Status of route dampening
Log neighbor changes Status of Log neighbor changes
Fast External Fallover Status of Fast External Fallover
Maximum received AS-path length Maximum AS-path length received
BGP administrative distances External, internal, and local BGP
administrative distances
Client-to-client reflection Whether client-to-client reflection is configured
Cluster ID Cluster IDs
Route-target filter Status of Route-target filter
Default IPv4-unicast Status of Default IPv4-unicast
Local-RIB version RIB version
Local-FIB version FIB version
Neighbor(s) BGP neighbors (if configured)
Networks for which routing is occurring
Aggregate Generation for Unicast Routes
Example 1
host1#show ipv6 protocols
Routing Protocol is
bgp 100"
Advertisement
Table of Contents
