Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 147

show profile brief
show route-map
total Total number of UDP packets received
checksum Number of checksum error packets received
no port Number of packets received for which no E Series router
application listener was listening on the destination port
UDP Statistics Sent:
total Total number of UDP packets sent
errors Number of error packets sent
Example
host1#show ip udp statistics
UDP Statistics:
Rcvd: 39196 total, 0 checksum errors, 29996 no port
Sent: 210 total, 0 errors
See show ip udp statistics
Use to list all profile names.
Field descriptions
Profile Profile names
Example
host1#show profile brief
Profile :
foo
trill
profile4
See show profile brief
Use to display the configured route maps.
The displayed information includes the instances of each access list such as
match and set commands.
Example
host1(config)#route-map westford permit 10
host1(config-route-map)#match community 44
host1(config-route-map)#set local-pref 400
host1(config-route-map)#exit
host1(config)#exit
host1#show route-map westford
route-map 1, permit, sequence 10
Match clauses:
match community 44
Chapter 1: Configuring IP
123
Monitoring IP