Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 195

show ipv6 forwarding-table slot
host1#show ipv6 forwarding-table slot 9
Free Memory = 32766 KB (99.99%)
Virtual Router
-------------------------------- -------------- ------------- --------------
default
1
Example 6
host1# show ipv6 interface brief
Interface
----------------- ------------------ ------- -------- ----------------
null0
FastEthernet9/1.5
FastEthernet9/0.6
loopback5 10:1:1:0:290:1aff:fe up
40:1d44/64
See show ipv6 address
See show ipv6 interface
Use to display details on the forwarding table for a specific line module only
when IPv6 is configured on the router. These details include the memory used
by each virtual router configured on the line module and free memory available
on the module.
The Load Errors field records any failed routing table distribution attempt as an
error. Attempts can fail for many reasons during normal operation; a failed
attempt does not necessarily indicate a problem. It is normal to see many Load
Errors per day.
If the Status field does not indicate Valid, then the routing table distribution has
failed constantly for that VR. It is normal and appropriate behavior for the Status
field to indicate Valid while the Load Error field increases daily.
Field descriptions
Free Memory Amount of routing table memory free on the line module,
in kilobytes
Virtual Router Name of the virtual routers configured on the line module
Memory (KB) Amount of routing table memory consumed by the virtual
router, in kilobytes
Load Errors Count of errors made while loading the routing table on the
line module
Status Whether the routing table for the virtual router is valid
Example
Memory(KB) Load Errors
- -
2 0
IPv6-Address Status Protocol
Unnumbered up
5:1:1::2/64 up
6:1:1::1/64 up
Status
Not Resident
Valid
Chapter 2: Configuring IPv6
Description
up
up IPv6 interface in
Virtual Router Hop
5
up IPv6 interface in
Virtual Router Hop
6
up
171
Monitoring IPv6