Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 344

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
host1# show ip ospf neighbors
Neighbor ID Pri State
10.0.8.1 1 TWO-WAY/DR Other
10.0.71.1 1 FULL/DR
10.0.96.1 1 FULL/BDR
host1# show ipv6 ospf neighbors
Neighbor ID Pri State
1.1.1.1 1 TWO-WAY/DROTHER
3.3.3.3 1 FULL/BDR
4.4.4.4 1 FULL/DR
show ip ospf remote-neighbor interface
320
Monitoring OSPF
Cause Cause of transition event
Time Time stamp for the event in day month date HH : MM : SS format
Example 1
Dead Time Address
00:00:39 10.0.76.1
00:00:42 10.0.76.2
00:00:28 10.0.76.4
Example 2
Dead Time Intf ID
00:00:40 0x3200042a
00:00:40 0x32000494
00:00:40 0x320004c9
Example 3
host1#show ip ospf neighbors history
Transition log for neighbor 10.10.8.2:
Interface Event Cause
==============================================
ATM2/0.8 Seen
Transition log for neighbor 10.10.12.2:
Interface Event Cause
==============================================
ATM2/0.12 Seen
ATM2/0.12 DOWN
ATM2/0.12 Seen
See show ipv6 ospf neighbors
Use to display all interfaces that are associated with OSPF remote neighbors.
Field descriptions
OSPF remote-neighbor Remote neighbor address for this interface
Update-source Update source for this interface
Remote-neighbor reachable Reachable status of the remote neighbor, yes
or no
Area Area of this interface
Network type Network type for this interface
Cost Cost value for this interface
Transmit Delay Transmit delay for this interface, in seconds
Interface State Interface state
Interface
fastEthernet11/0
fastEthernet11/0
fastEthernet11/0
Interface
FastEthernet13/1.172
FastEthernet13/1.172
FastEthernet13/1.172
Time
NA WED DEC 14 07:02:27
Time
NA WED DEC 14 07:09:12
Interface down WED DEC 14 07:05:47
NA WED DEC 14 07:02:32