Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 137

New soconnect failed Number of times a SONEWCONN() was tried on a
listening connection and failed. This is a per-connection statistic.
# Write-Wakeups Number of times a " write wakeup" occurred on the
connection. This is a per-connection statistic.
# Read wakeups Number of times a " read wakeup" occurred on the
connection. This is a per-connection statistic.
# receives after close Number of packets received with data after the
connection entered the close-wait state. This is a per-connection statistic.
Retransmit timer Current value of the retransmit timer
Persistence timer Current value of the persistence timer
Keepalive timer Current value of the keepalive timer
2MSL timer Current value of the 2MSL (max segment lifetime) timer
tcpDisconnect()s Number of times BsdTcp::tcpDisconnect() was called. This
is a per-connection statistic.
keep T/O pre-estab Number of times the keepalive timer expired before
the connection reached the established state. This is a per-connection statistic.
tcpkeeptimeo_idle Number of times the keepalive timer popped, but no
keepalive was sent because of connection idle-time considerations. This is
a per-connection statistic.
TCP Connection Event Log (most recent at bottom) Event log for the TCP
connection. It shows the last 32 events that occurred on the connection. The
most recent event is at the bottom of the list. This is per-connection data.
TCPS_ELOG_PRU_ATTACH
TCPS_ELOG_PRU_BIND
The following events can be recorded:
Fast Timeout
2MSL Timeout
Retransmit Timeout
Persist Timeout
Received FIN packet
Received SYN packet
Received Retransmission
Transmit a FIN packet
Transmit a SYN packet
Chapter 1: Configuring IP
Did a PRU_CONNECT
Did a PRU_CONNECT2
Did a PRU_DISCONNECT
Did a PRU_ACCEPT
Did a PRU_SHUTDOWN
Did a PRU_RCVD
Did a PRU_SEND
Did a PRU_ABORT
Did a PRU_SENSE
Monitoring IP
113