Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 414

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
show isis database
390
Monitoring IS-IS
Example
host1:abc#show hosts
Static Host Table
-----------------
name ip address type
---- ---------- ----
jkk 10.10.0.73 ftp
Clns Host Alias Table
---------------------
name area address
----- -------------------------------- ----------------- ------
fred 47.0005.80FF.F800.0000.0001.0001 0000.0000.0011.00 static
karen 47.0005.80FF.F800.0000.0001.0001 0000.0000.0012.00 static
See show hosts
Use to display IS-IS link-state database information.
Request specific show isis database statistics by selecting from these options:
lspid Link-state protocol ID in form xxxx.xxxx.xxxx.yy-zz
hostname Link-state database information for the specified hostname
detail Detailed link-state database information; if this option is not specified,
a summary display is provided
l1 Level 1 routing link-state database
l2 Level 2 routing link-state database
level-1 Level 1 routing link-state database
level-2 Level 2 routing link-state database
Each option can be entered in an arbitrary string within a single command entry.
Field descriptions
LSPID LSP identifier
LSP Seq Num Sequence number for the LSP. Enables other routers to
determine if they have received the latest information from source.
LSP Checksum Checksum of the LSP packet
LSP Holdtime Number of seconds that the LSP remains valid
ATT Attach bit; indicates that the router is a level 2 router and can reach
other areas
P P bit; detects whether intermediate system is capable of area partition
repair
OL Overload bit; determines whether intermediate system is congested
username password
--------- --------
anonymous null
system ID type