Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 106

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
To set a statistics baseline for IP interfaces, use the baseline tcp and baseline ip
udp commands. Use the delta keyword with IP show commands to specify that
baselined statistics are to be shown.
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string that you specify. See JUNOSe System Basics
Configuration Guide, for details.
show access-list
82
Monitoring IP
To Display
Protocols
Redistribution policies
Routes
Interfaces and next hops
Socket statistics
Static routes
TCP ACK, RST, and SYN protection
status
Black hole threshold information
TCP statistics
Traffic
UDP statistics
Profiles
Route maps
Use to display information about access lists, including the instances of each
access list.
Example
host1#show access-list
IP Access List 1:
permit ip 172.31.192.217 0.0.0.0 0.0.0.0 255.255.255.255
permit ip 12.40.0.0 0.0.0.3 0.0.0.0 255.255.255.255
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 2:
permit ip 172.19.0.0 0.0.255.255 0.0.0.0 255.255.255.255
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 10:
permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
IP Access List 11:
deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
Command
"show ip protocols" on page 96
"show ip redistribute" on page 99
"show ip route" on page 99
"show ip route slot" on page 103
"show ip socket statistics" on page 103
"show ip static" on page 107
"show tcp ack-rst-and-syn" on page 108
"show tcp path-mtu-discovery" on page 109
"show tcp statistics" on page 110
"show ip traffic" on page 119
"show ip udp statistics" on page 122
"show ip profile" on page 95
"show route-map" on page 123