Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 132

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
10.10.133.17/32 10.6.128.1
11.11.11.11/32 3.3.3.3
show tcp ack-rst-and-syn
show tcp resequence-buffers
108
Monitoring IP
1 1 0 unresolved
0 1 0 unresolved
See show ip static
Use to display the status of TCP ACK, RST, and SYN protection.
Example
host1#show tcp ack-rst-and-syn
TCP Ack Rst and Syn Protection is ENABLED
See show tcp ack-rst-and-syn
Use to display the configuration, current per-VR, and per-router state of the TCP
resequencing buffer management functions.
Use the vrfName variable to specify a specific VRF for which you want to view
information.
Field descriptions
TCP Resequence Buffer Management Configuration
Global Maximum Number of buffers that can be on the reordering queues
of all connections in all virtual routers
Default Per-VR Maximum Default maximum number of buffers for all
connections in a single VR
Default Connection Maximum Default maximum number of buffers for
each connection in each virtual router
This VR Maximum Maximum number of outstanding resequencing buffers
in the current VR
This VR Connection Maximum Maximum number of outstanding
resequencing buffers on any one connection in this VR
TCP Resequence Buffer Management State
Global buffers in use Total number of outstanding resequencing buffers in
the router
High Water Largest number of outstanding resequencing buffers that
the router has experienced since the last reset
VR Buffers in use Number of outstanding resequencing buffers in the current
virtual router
1 down
1 down(lr)