Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 101

show rtr history
rtrIndex receiveInterface
---------- ----------------
1 fastEthernet0/0
rtrIndex operFail
---------- --------
1 1
rtrIndex operPerHop
---------- ----------
2 5
See show rtr configuration
Use to display history (data samples) for a particular probe or for all probes.
Field descriptions
rtrIndex Index number of the RTR probe
operation Index number of the probe operation
rtt Round-trip time in milliseconds
statusDescription
concurrentLimitFail Target already being used by another rtrIndex
ifInactiveToTarget Interface used to reach target is not operational
invalidHostAddress Target address is not supported
noRouteToTarget Target address is not reachable
responseReceived Probe operation replied by target
requestTimedOut Probe operation not replied to by target or reply
received after timeout
unknownDestAddress Target address is invalid
unableToResolveName Target address could not be looked up
timeStamp Date and time when the RTR entry was created
test Index number of the pathEcho test
hop Index number of the hop count
operation Index number of the probe operation
address Address of router at the hop
Example
host1#show rtr history
Echo Entries:
testFail timeout tag
-------- ------- ------
1 10000
maxFail hopKpt tag
------- ------ ------
3 16
Response Time Reporter
Chapter 1: Configuring IP
77