Table of Contents
Advertisement
show clns
IS-IS Level-2 Link State Database
LSPID
LSP Seq Num
There is no no version.
See clear isis database
Use to display global CLNS information about the router.
Field descriptions
Interfaces Enabled for CLNS Number of interfaces that have the CLNS
routing protocol enabled
Configuration Timer Interval (in seconds) after which the router sends out
IS hello packets
Default Holding Timer Length of time (in seconds) that hello packets are
remembered
Packet Lifetime Default value used in packets sourced by this router
Intermediate system operation enabled (forwarding allowed) Indicates
whether this router is configured to be an ES or an IS
IS-IS Level-1-2 Router Shows whether IS-IS is running in this router, gives
tag information, and shows whether it is running level 1 or level 1-2
Routing for Area ISO (NSAP) address for the network
Distribute domain wide enabled Indicates whether distribute-domain-wide
is enabled
Area Authentication Displays the following fields if area authentication is
enabled:
PSNP/CSNP PDU authentication enabled Indicates whether
authentication of level 1 PSNP packets and/or level 1 CSNP packets has
been enabled by means of the area-authentication command
Key-id Numeric identifier for the authentication key
Type Type of authentication: hmac-md5 or password; an asterisk after
the type indicates that the key is active
Start Accept Date and time that the router starts accepting packets
created with this password
Start Generate Date and time that the router starts inserting this
password into packets
Chapter 6: Configuring IS-IS
LSP Checksum
LSP Holdtime
Monitoring IS-IS
ATT/P/OL
403
Advertisement
Table of Contents
