Juniper IGP - CONFIGURATION GUIDE V11.1.X Configuration Manual page 201

show ipv6 redistribute
show ipv6 route
Local router ID 1.1.1.1, local AS 100
Administrative state is Start
Operational state is Up
Shutdown in overload state is disabled
Default local preference is 100
IGP synchronization is enabled
Default originate is disabled
Auto summary is enabled
Always compare MED is disabled
Compare MED within confederation is disabled
Advertise inactive routes is disabled
Advertise best external route to internal peers is disabled
Enforce first AS is disabled
Missing MED as worst is disabled
Route flap dampening is disabled
Log neighbor changes is disabled
Fast External Fallover is disabled
No maximum received AS-path length
BGP administrative distances are 20 (ext), 200 (int), and 200 (local)
Client-to-client reflection is enabled
Cluster ID is 1.1.1.1
Route-target filter is enabled
Default IPv4-unicast is enabled
Local-RIB version 8. FIB version 8.
Neighbor(s):
No neighbors are configured
Routing for Networks:
Aggregate Generation for Unicast Routes:
Example 2
host1#show ipv6 protocols summary
bgp 100
See show ipv6 protocols
Use to display configured route redistribution policy.
Field descriptions
To Protocol that routes are distributed into
From Protocol that routes are distributed from
status Redistribution status
route map name Name of the route map
Example
host1#show ipv6 redistribute
To bgp, From static is enabled with route map foo
To bgp, From connected is enabled without a route map
See show ipv6 redistribute
Chapter 2: Configuring IPv6
177
Monitoring IPv6