Image-Safe Data Viewer And Editor (Zisview And Zisedit); Information Displayed By The Image-Safe Data Viewer - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

If a device is new and does not contain a unique network identity, the default settings that you have
configured for the ZENworks Management Zone are applied when you image the device using a
Preboot Services Imaging bundle.
The data that the Imaging Agent saves to (or restores from) the image-safe area includes the
following:
Whether a static IP address or DHCP is used
If a static IP address is used:
IP address
Subnet mask
Default gateway (router)
DNS settings
DNS suffix
DNS hostname
DNS servers
The novell-zislnx daemon is generally run automatically. However, if you want to run it manually,
for the command line arguments that can be used with the Imaging Agent, see
Script Arguments" on page
D.3 Image-Safe Data Viewer and Editor (zisview
and zisedit)
After booting a device from an imaging boot media (PXE, CD, DVD, or ZENworks partition), you
can enter zisedit and zisview at the Linux bash prompt to edit and view the image-safe data
for that device.
The following sections contain additional information:
Section D.3.1, "Information Displayed by the Image-Safe Data Viewer," on page 597
Section D.3.2, "Using the Image-Safe Data Viewer," on page 599
Section D.3.3, "Using the Image-Safe Data Editor," on page 600
D.3.1 Information Displayed by the Image-Safe Data Viewer
After booting a device from an imaging boot media, enter zisview at the Linux bash prompt to
view the image-safe data for that device.
The image-safe data viewer (zisview) displays the following information about the device:
613.
"Understanding
Imaging Utilities and Components 597