Image-Safe Data Viewer And Editor (Zisview And Zisedit); Information Displayed By The Image-Safe Data Viewer - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

The data that the Imaging Agent saves to (or restores from) the image-safe area includes the
following:
Whether a static IP address or DHCP is used
If a static IP address is used:
IP address
Subnet mask
Default gateway (router)
DNS settings
DNS suffix
DNS hostname
DNS servers
The novell-zislnx daemon is generally run automatically. However, if you want to run it manually,
for the command line arguments that can be used with the Imaging Agent, see
Script Arguments" on page
D.3 Image-Safe Data Viewer and Editor (zisview
and zisedit)
After booting a device from an imaging boot media (PXE, CD, DVD, or ZENworks partition), you
can enter and
zisedit zisview
that device.
The following sections contain additional information:
Section D.3.1, "Information Displayed by the Image-Safe Data Viewer," on page 613
Section D.3.2, "Using the Image-Safe Data Viewer," on page 615
Section D.3.3, "Using the Image-Safe Data Editor," on page 616
D.3.1 Information Displayed by the Image-Safe Data Viewer
After booting a device from an imaging boot media, enter
view the image-safe data for that device.
The image-safe data viewer (
629.
at the Linux bash prompt to edit and view the image-safe data for
) displays the following information about the device:
zisview
"Understanding
at the Linux bash prompt to
zisview
Imaging Utilities and Components 613