Enabling/Disabling Rules - Novell SENTINEL 6.1 SP2 - 02-2010 User Manual

If nothing is selected, a Correlated Event with default values is created.
Click Deploy.
To Undeploy a Single Rule:
1 In the Correlation Engine Manager, right-click the rule and select Undeploy Rule.
2 Alternatively, in the Correlation Rule Manager, highlight the rule and click Undeploy rule link.
To Undeploy All Correlation Rules:
1 Open the Correlation Engine Manager window.
2 Right-click the Correlation Engine and select Undeploy All Rules.

3.3.7 Enabling/Disabling Rules

To Enable/Disable Rule:
1 Open the Correlation Engine Manager window.
2 Highlight and right-click the rule or set of rules and select Enable Rule or Disable Rule.
Correlation Tab 79