Table of Contents
Advertisement
31.8.3 Creating a New Partition
New partitions cannot be created in an existing base or add-on image that you opened for editing.
You can only create a new partition in a new image file. For more information, see
Partitions" on page
31.8.4 Resizing a Partition
You can resize the partitions in a base image, but not an add-on image. For more information, see
"Changing a Partition's Size" on page
31.9 Creating a New Image File
Do the following to create a new image file:
Section 31.9.1, "Creating, Configuring, and Saving the New Image File," on page 476
Section 31.9.2, "Selecting New Image File Options," on page 476
31.9.1 Creating, Configuring, and Saving the New Image File
1 Click File > New.
2 Configure the new image file using the instructions in
page
476, then return to
3 To save the new image file, click Save As.
4 Specify an image filename, including the
31.9.2 Selecting New Image File Options
You can do the following in this new image file:
"Adding Partitions" on page 476
"Adding Content" on page 477
"Configuring File Sets" on page 477
Adding Partitions
1 Select the top line of the new image file.
This is the line that will display the path to the new
2 Click Image > Create Partition.
3 Repeat
4 To add content to the partitions, continue with
476 Novell ZENworks 7.3 Linux Management Administration Guide
476.
Step
3.
Step 1
through
Step 2
as necessary.
469.
"Selecting New Image File Options" on
filename extension, then click Save.
.zmg
file when you save it.
.zmg
"Adding Content" on page
"Adding
477.
Advertisement
Table of Contents
