Creating A New Image File; Creating A New Directory; Creating A New Partition; Resizing A Partition - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

You can select multiple files using the Shift and Ctrl keys.
5 Repeat these steps as necessary.

31.8.2 Creating a New Directory

To create a directory in the open image:
1 Click File > Open.
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Browse for the partition or directory in the left pane where you want to create the directory,
then click Image > Create Directory.
You can also click the New Directory icon.
4 Specify the name of the directory, then click OK.

31.8.3 Creating a New Partition

New partitions cannot be created in an existing base or add-on image that you opened for editing.
You can only create a new partition in a new image file. For more information, see
Partitions" on page

31.8.4 Resizing a Partition

You can resize the partitions in a base image, but not an add-on image. For more information, see
"Changing a Partition's Size" on page

31.9 Creating a New Image File

Do the following to create a new image file:
Section 31.9.1, "Creating, Configuring, and Saving the New Image File," on page 466
Section 31.9.2, "Selecting New Image File Options," on page 466

31.9.1 Creating, Configuring, and Saving the New Image File

1 Click File > New.
2 Configure the new image file using the instructions in
page 466, then return to
3 To save the new image file, click Save As.
4 Specify an image filename, including the .zmg filename extension, then click Save.

31.9.2 Selecting New Image File Options

You can do the following in this new image file:
"Adding Partitions" on page 467
466 Novell ZENworks 7.2 Linux Management Administration Guide
467.
459.
Step 3.
"Adding
"Selecting New Image File Options" on