Opening An Image; Saving Image Changes And Exiting The Utility; Managing Image Properties; Viewing And Modifying The Properties Of The Image File - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

Dragging Files from Image Explorer: You cannot drag files from Image Explorer in order to
extract them, which you can do in Linux Konquerer. However, you can drag and drop files and
folders into an image by using Image Explorer.

31.4 Opening an Image

1 Start Image Explorer.
2 Browse for and select the image file.
Large image files might take a few moments to open.
31.5 Saving Image Changes and Exiting the
Utility
To save your changes when exiting the utility:
1 Click File > Save or Save As.
2 Browse for and save the image file in .zmg format.
3 Click File > Exit to close the utility.

31.6 Managing Image Properties

You can view the properties of an image file or any item in its content, including modifying some of
the properties:
Section 31.6.1, "Viewing and Modifying the Properties of the Image File," on page 468
Section 31.6.2, "Viewing the Properties of an Image File Item," on page 469
Section 31.6.3, "Changing a Partition's Size," on page 469

31.6.1 Viewing and Modifying the Properties of the Image File

1 Click File > Open.
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Select the top line of the opened image file.
This is the line that displays the path to the
4 Click File > Properties.
You can also right-click the top line, then select Properties.
5 (Optional) Fill in the fields:
Description: Specify useful information, such as its purpose or its important content.
Author: Specify the author of this version of the image.
Comments: Specify any information that is helpful.
6 Save the image file to save your properties changes.
7 To close the properties dialog box, click OK.
468 Novell ZENworks 7.3 Linux Management Administration Guide
file.
.zmg