Changes To Bundle Schedules In Zenworks 7.2 Linux Management; Upgrade Options - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Hide thumbs Also See for ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009:
Table of Contents

Advertisement

11.3 Changes to Bundle Schedules in ZENworks
7.2 Linux Management
Because of the elimination of certain schedule types for bundles in ZENworks 7.2 Linux
Management, the deployment and installation schedules for bundles that existed in your ZENworks
system prior to upgrading might behave differently.
ZENworks 7.2 Linux Management supports the following schedule types for bundles:
"Date
Specific"
"Event"
"Relative to
Refresh"
The following schedule types are no longer supported for bundles in ZENworks 7.2 Linux
Management, although they are still supported for certain policies:
"Day of the Week
Specific"
"Monthly"
In an upgrade from ZENworks 7 Linux Management with IR1 or ZENworks 7 Linux Management -
Dell Edition, any bundles that were configured using the Day of the Week or Monthly schedules are
treated as Relative to Refresh after the upgrade.
If you look at a bundle's properties in the ZENworks Control Center after the upgrade, an upgraded
bundle that was originally configured using the Day of the Week Specific or Monthly schedule has
the eliminated schedule type listed, but deploys or installs using the Relative to Refresh schedule.
You can manually change the bundle's displayed schedule type to one of the three valid schedule
types at your convenience.

11.4 Upgrade Options

The following options can be used with the
Option
Description
-a
Upgrades the ZENworks Agent on a managed device.
-b
Creates bundles that can be used to upgrade ZENworks Linux Management devices.
This option must be executed only on the ZENworks Primary Server.
If you are installing ZENworks Linux Management rather than performing an upgrade from a
previous version, installation options are available for use with the
more information, see
Section A.1, "Installation Options," on page
command:
zlm-upgrade
zlm-install
117.
Upgrading to ZENworks 7.2 Linux Management
command. For
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks linux management 7.2 ir2

Table of Contents