Portstats64Show - Brocade Communications Systems 8 Command Reference Manual

portStats64Show

Displays the 64-bit hardware statistics for a port.
Synopsis portstats64show [slot/]port [-long]
Description Use this command to display 64-bit hardware statistics for a specified port. When used without the
-longoption, two integers are reported for most values, the lower and upper 32-bits are reported as
two separate numbers. In this case, the top word is the most significant. When issued with the -long
option, the command displays the counters as one single 64-bit number.
stat64_wtx
stat64_wrx
stat64_ftx
stat64_frx
stat64_c2_frx
stat64_c3_frx
stat64_lc_rx
stat64_mc_rx
stat64_mc_to
stat64_mc_tx
tim64_rdy_pri
tim64_txcrd_z
er64_enc_in
er64_crc
er64_trunc
er64_toolong
er_bad_eof
er64_enc_out
er64_disc_c3
stat64_rateTxFrame
stat64_rateRxFrame
stat64_rateTxPeakFrame
stat64_rateRxPeakFrame
stat64_rateTxByte
stat64_rateRxByte
Fabric OS Command Reference
53-1001764-02
Number of 4-byte words transmitted.
Number of 4-byte words received.
Number of frames transmitted.
Number of frames received.
Number of class 2 frames received.
Number of class 3 frames received.
Number of link control frames received.
Number of multicast frames received.
Number of multicast timeouts.
Number of multicast frames transmitted.
Number of times R_RDY was high priority.
Number of times that the TX BB_credit was at zero.
Number of encoding errors inside of frames.
Number of frames with CRC errors.
Number of frames shorter than minimum.
Number of frames longer than maximum.
Number of frames with bad end-of-frame.
Number of encoding error outside of frames.
Number of class 3 frames discarded.
Tx frame rate (frames/second).
Rx frame rate (frames/second).
Tx peak frame rate (frames/second).
Rx peak frame rate (frames/seconds).
Tx Byte rate (Bps).
Rx Byte rate (Bps).
2
portStats64Show
783