Display Modes; How To Choose Display Mode - Simrad SH90 - REFERENCE MANUAL REV A Reference Manual

DISPLAY MODES

How to choose display mode

323775/A
This chapter describes the Simrad SH90 display modes. The
various modes represent the graphical presentation of sonar data.
Several display modes are available to present the best possible
presentations as well as flexible choices for a large range of user
applications.
Note
The descriptive order of the display modes in this chapter has
been chosen only to simplify the descriptions. In operational
conditions, the order depends on the selected gear. This is
because different initial display modes are used for easy selection
by the four buttons on the Operating Panel. The order of
Mode
these display modes can easily be changed in the
Topics
• How to choose display mode on page 67
• Bow up on page 69
• Bow up/Audio on page 70
• Bow up/Vertical on page 71
• Bow up/Dual Vertical on page 72
• Bow up/180° Vertical on page 73
• True motion on page 74
• True motion/Vertical on page 75
• North up on page 76
• Dual 1 on page 77
• Dual 2 on page 78
• 270°/Vertical on page 79
Display mode selection is made by clicking the
the top of all menus. The four first display modes shown can also
easily be selected with the four
Panel.
1 Locate the
Mode
Press one of the four buttons to choose mode.
2
buttons on the Operating
Mode
field on your Operating Panel
Display modes
menu.
Sort Mode
button on
Mode
67