Changing The Aging Time; Figure 9-3 Address Aging - SMC Networks TigerStack II SMC8848M Management Manual

Changing the Aging Time

You can set the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables/disables the aging function.
• Aging Time – The time after which a learned entry is discarded.
• (Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
CLI – This example sets the aging time to 400 seconds.
Console(config)#mac-address-table aging-time 400
Console(config)#

Figure 9-3 Address Aging

C
HANGING THE
A T
GING IME
28-5
9-5