Show Interfaces Protocol-Vlan Protocol-Group - SMC Networks TigerStack II SMC8848M Management Manual

show interfaces protocol-vlan protocol-group

This command shows the mapping from protocol groups to VLANs for
the selected interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for
protocol group 1 will be mapped to VLAN 2:
Console#show interfaces protocol-vlan protocol-group
Port
---------- ------------------ -----------
Eth 1/1
Console#
ProtocolGroup ID
C P
ONFIGURING
Vlan ID
1 vlan2
-
ROTOCOL BASED
VLAN
S
30-23