Changing The Aging Time - SMC Networks 6724AL2 Management Manual

For example, the following screen shows the dynamic addresses for
port 21.
CLI – This example also displays the address table entries for port 11.
Console#show mac-address-table ethernet 1/11
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/11 00-10-b5-62-03-74
Console#

Changing the Aging Time

You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-30000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
then click Apply.
A
DDRESS
Vlan Type
1 Learned
T S
ABLE ETTINGS
3-101
2-89