Command Mode
Privileged Exec
Example
Console#show ip rip configuration
Interface
Authentication
--------------- --------------- ------------- --------------
------------------
10.1.0.253
noAuthentication
10.1.1.253
noAuthentication
Console#show ip rip status
Interface
--------------- --------------- -------------- ---------------
10.1.0.253
10.1.1.253
Console#show ip rip peer
Peer
--------------- ------------ --------- --------------- --------------
10.1.0.254
10.1.1.254
Console#
Table 37-7 show ip rip - display description
Field
show ip rip configuration
Interface
SendMode
ReceiveMode
Poison
Authentication
show ip rip status
Interface
RcvBadPackets
RcvBadRoutes
R
OUTING
SendMode
rip1Compatible
rip1Compatible
RcvBadPackets
RcvBadRoutes
0
0
UpdateTime
Version
1625
1625
Description
IP address of the interface.
RIP version sent on this interface (none, RIPv1, RIPv2,
or RIPv2-broadcast)
RIP version received on this interface (none, RIPv1,
RIPv2, RIPv1 or RIPv2)
Shows if split-horizon, poison-reverse, or no protocol
message loopback prevention method is in use.
Shows if authentication is set to simple password or
none.
IP address of the interface.
Number of bad RIP packets received.
Number of bad routes received.
I
NFORMATION
ReceiveMode
Poison
RIPv1Orv2
SplitHorizon
RIPv1Orv2
SplitHorizon
SendUpdates
0
0
RcvBadPackets
2
2
P
(RIP)
ROTOCOL
13
13
RcvBadRoutes
0
0
0
0
37-23
Need help?
Do you have a question about the TigerStack II SMC8848M and is the answer not in the manual?
Questions and answers