Show Ipv6 Neighbors; Table 36-6 Show Ipv6 Neighbors - Display Description - SMC Networks TigerStack II SMC8848M Management Manual

show ipv6 neighbors

This command displays information in the IPv6 neighbor discovery cache.
Syntax
show ipv6 neighbors [vlan vlan-id | ipv6-address]
• vlan-id - VLAN ID (Range: 1-4093)
• ipv6-address - The IPv6 address of a neighbor device. You can specify
either a link-local or global unicast address formatted according to
RFC 2373 "IPv6 Addressing Architecture," using 8 colon-separated
16-bit hexadecimal values. One double colon may be used in the
address to indicate the appropriate number of zeros required to fill
the undefined fields.
Default Setting
All IPv6 neighbor discovery cache entries are displayed.
Command Mode
• Normal Exec - No command options are available.
• Privileged Exec - All command options are available.
Example
The following shows all known IPv6 neighbors for this router:
Console#show ipv6 neighbors
IPv6 Address
2009:DB9:2229::79
FE80::200:E8FF:FE90:0
Console#
Field
IPv6 Address
Age
Link-layer Addr Physical layer MAC address.

Table 36-6 show ipv6 neighbors - display description

Description
IPv6 address of neighbor
The time since the address was verified as reachable (in
minutes). A static entry is indicated by the value "Permanent."
Age Link-layer Addr
666 00-00-E8-90-00-00
671 00-00-E8-90-00-00
B IP C
ASIC ONFIGURATION
State
STALE
STALE
Vlan
1
1
36-43