Frame Size Commands; Jumbo Frame; Table 20-4 Frame Size Commands - SMC Networks TigerStack II SMC8848M Management Manual

Example
Console#show version
Unit1
Serial Number:
Hardware Version:
EPLD Version:
Number of Ports:
Main Power Status:
Redundant Power Status:
Agent (master)
Unit ID:
Loader Version:
Boot ROM Version:
Operation Code Version:
Console#

Frame Size Commands

This section describes commands used to configure the Ethernet frame
size on the switch.
Command

jumbo frame

jumbo frame
This command enables support for jumbo frames. Use the no form to
disable it.
Syntax
[no] jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
0000E8900000
R01
1.02
26
Up
Not present
1
1.0.0.1
1.0.0.1
3.30.7.54

Table 20-4 Frame Size Commands

Function
Enables support for jumbo frames
F S C
RAME IZE OMMANDS
Mode Page
GC 20-11
20-11