Figure 4-17 Configuring The Telnet Interface - SMC Networks TigerStack II SMC8848M Management Manual

B M
ASIC ANAGEMENT
Web – Click System, Line, Telnet. Specify the connection parameters for
Telnet access, then click Apply.
CLI – Enter Line Configuration mode for a virtual terminal, then specify
the connection parameters as required. To display the current virtual
terminal settings, use the show line command from the Normal Exec
level.
Console(config)#line vty
Console(config-line)#login local
Console(config-line)#password 0 secret
Console(config-line)#timeout login response 300
Console(config-line)#exec-timeout 600
Console(config-line)#password-thresh 3
Console(config-line)#end
Console#show line vty
VTY configuration:
Password threshold:
Interactive timeout: 600 sec
Login timeout:
Console#
4-40
T
ASKS

Figure 4-17 Configuring the Telnet Interface

3 times
300 sec
20-22
20-23
20-24
20-25
20-26
20-27
20-32