Configuring Static Dns Host To Address Entries - SMC Networks TigerStack II SMC8848M Management Manual

D N
OMAIN AME
CLI - This example sets a default domain name and a domain list.
However, remember that if a domain list is specified, the default domain
name is not used.
Console(config)#ip domain-name sample.com
Console(config)#ip domain-list sample.com.uk
Console(config)#ip domain-list sample.com.jp
Console(config)#ip name-server 192.168.1.55 10.1.0.55
Console(config)#ip domain-lookup
Console#show dns
Domain Lookup Status:
DNS enabled
Default Domain Name:
.sample.com
Domain Name List:
.sample.com.uk
.sample.com.jp
Name Server List:
192.168.1.55
10.1.0.55
Console#
Configuring Static DNS Host to
Address Entries
You can manually configure static entries in the DNS table that are used to
map domain names to IP addresses.
Command Usage
• Static entries may be used for local devices connected directly to the
attached network, or for commonly used resources located elsewhere on
the network.
• Servers or other network devices may support one or more connections
via multiple IP addresses. If more than one IP address is associated with
a host name in the static table or via information returned from a name
server, a DNS client can try each address in succession, until it
establishes a connection with the target device.
15-4
S
ERVICE
34-4
34-5
34-6
34-7
34-9